| 1. | Surface magnetic flux density
表面磁通密度mt |
| 2. | Residual magnetic flux density
残余磁通密度 |
| 3. | Specifications for magnetic flux density and electric field strength meters - 10 hz to 3 khz
磁通量密度和电场强计的规格. 10hz - 30khz |
| 4. | Recommended practice for instrumentation for magnetic flux density and electric field strength meters - 10hz to 3khz
10hz - 3khz磁通密度检测仪表和电场强度计的推荐实施规程 |
| 5. | 3 in si units , the ratio between the magnetic flux density b and the magnetic force h defines the permeability
在国际单位制中，磁感应强度b与磁场强度h之比被称为导磁率。 |
| 6. | Based on the analysis of the magnetic circuit , the computation expressions of the magnetic force , magnetic flux density and inductance are derived
在磁路分析的基础上，推导了磁力、磁通密度和电感的计算公式。 |
| 7. | This test system can also adjust the amplitude of the magnetic flux density . so it is easy to use and increases the degree of the test automatization
同时，它可以对幅值磁感应强度b _ m进行自动调节，测试时简单方便，提高了测试自动化程度。 |
| 8. | The contact design provides two areas with nearly the same axial magnetic flux density distribution ( by amount ) , i . e . two areas with equal conditions are given
该触头设计提供了两个纵向磁通量密度分布(数值上)基本相同的区域,也就是说,给出了两个条件相同的触头区域。 |
| 9. | This test system can maintain the magnetic flux density ( 5 ) for sine wave automatically . so we need n ' t revise the testing data because of the distortion of the waveform
本测试系统可以实现自动保持磁感应强度b波形为正弦形，从而避免了对测试数据还要进行波形修正的麻烦，提高了测试的精度。 |
| 10. | Our factory ' s soft ferrite made from good - quality iron oxide has merits of high permeability , high saturation magnetic flux density and low loss , and id widely used in electric and electronic sets of various kinds
利用本公司优质氧化铁生产的软磁铁氧体，具有高磁导率，高饱和磁通密度和低损耗的优点，它广泛的用于各类电子电器整机中。 |
